Saving Money with Fastback Binding Machines Bathurst NSW

Every year it seems like budgets get tighter and tighter for both school and public libraries. Unfortunately, a large amount far too much of this budget ends up getting spent on replacing trade paperback books that have fallen apart or buying new trade paperbacks that will soon fall apart.

Edward Brooks & Co
(02) 6331 3014
197a Browning St
Bathurst, NSW
Eckersleys Pty Ltd
(02) 4929 3423
Cnr Parry & Union Sts
Newcastle, NSW
Triton Copy Centre
(02) 4954 7499
40 Harrison St
Cardiff, NSW
Dekodur-Dekorial Lamtech
(02) 9451 7588
5 Ashdown Pl
Frenchs Forest, NSW
Fineform Tops & Panels Pty Ltd
(02) 4352 2626
7 Mildon Rd
Tuggerah, NSW
Xerox Business Centre
(02) 4969 4888
64 The Avenue Wickham, NSW
Probiz Concepts Pty Ltd
(02) 9897 5100
Suite 4/ 8 McFarlane St
Merrylands, NSW
Premier Art & Laminating
(02) 6621 6081
69 Magellan St
Lismore, NSW
Formica
(02) 8394 9696
276 Devonshire St
Surry Hills, NSW
Plasti-Shield
(02) 9520 4189
91 Woronora Rd
Engadine, NSW
Provided By:

Saving Money with Fastback Binding Machines

How Libraries Can Save Money Using Their Powis Parker Fastback Binding Machine

Author: Jeff McRitchie

Most trade paperback books are mass manufactured by publishers for occasional use by private individuals. They are made to be read through a few times without falling apart. However, popular books in a library get far more usage than this. Within 4-5 reads, the book block can begin to separate from the cover and some of the pages can begin to fall out of the book. This is partially because the book block is not fully seated into the glue during the initial binding process. Using your Fastback 15xs or other fastback binding machine (the model 11, 8x and 9 will work but have limited capacity compared to the model 15) you can take your brand new books and extend their life through a simple process. Here is what you need to do.

2. When you are ready to begin the process simply turn on your Fastback binding machine and set it to the editing mode. This mode is normally designed for adding or removing pages from a document bound with Fastback. In this instance you won't be using the editing mode to add or remove pages; you will simply be using the machine to reactivate the glue in the spine of your paperback book.

4. Once the book has completed the binding cycle you simply need to remove it from the Fastback binding machine and firmly tap the still hot spine on a hard surface such as a table or countertop. This will cause the book block to settle further into the hot glue inside the spine of your book.

If by chance you do have a paper back book with a cover that begins to separate from its book block you can also use your Fastback machine to quickly and easily repair it. All you need to do is use the editing setting to reactivate the glue in the spine and re-adhere the cover to the book. In extreme cases where pages are falling out you can also use a fastback machine to rebind the book block using tape binding or can use PerfectBack binding strips to add a new wrap around cover to book.


About the Author:

If you are looking for Fastback Binding Machines or Fastback Binding Strips you should visit MyBinding.com. They are the largest online dealer for Powis Parker Fastback products in the United States. In fact, they carry the entire line of Powis Parker Fastback binding products.

Article Source: http://www.articlesbase.com/presentation-articles/how-libraries-can-save-money-using-their-powis-parker-fastback-binding-machine-924563.html